Getting going with embroidering a brief guide basic fundamentals Courtneys

10 August, 2012

I learned how to make my own clothes at the age of five years of age, I would take exceptional enjoy hand sewing tiny bags and garments for my toys. By the time I was a teenager I became very proficient in sewing and would make almost all of my own outfits. It was a natural further evolvement to embroidering, I learned the essential hand needlework methods and I would accentuate my own clothes.

In 1999 I came accross machine embroidery, I thought it was magic, and I even now do. In the past I aquired a sewing and embroidery machine in one, It was not inexpensive at the time, nonetheless it pails when compared with today’s machines. I still have it and use it for sewing on a regular basis and at times while my 6 needle embroidery machine is otherwise employed I will even now use it for embroidery.

The spectacular point is the fact once i at first acquired my one needle embroidery machine I would not end up with good results. The cause of this is that in 1999 there wasn’t the knowledge around to teach machine embroiderers. I take the old machine out today and my end result are wonderful, it is because I these days understand I am doing.

This brings me one of my personal favorite sayings, “1st you should know the laws, you’ll then break them”. Being an avid cook, dressmaker, embroidery designer, and digitizer I believe this school of thought applies to all sorts of things. With the food prep I am aware what spices and herbs go with what meats and produce and I will manipulate amounts and swap stuff. However you need to know the principles, when you understand the foundations and the reason behind them then you’re able to change methods to suit yourself.

Proper hooping techniques can make the difference to your end result. Hoop the stabilizer with the fabric. Ensure that the fabric is stable within the hoop however, not distorted. A bit of nonslip matting on the work counter will help keep your lower hoop stable as you position your cloth.

A dense, large stitch count number pattern on a lightweight fabric will entirely wreck the cloth flow. Select dainty patterns when working with light fabric. While sewing a design onto a towel or high pile material, opt for a dense design that won’t disappear altogether in the pile. Finally, for stretch materials, do not try anything too heavy and sizeable. Don’t forget, the cloth is going to stretch, however the embroidery won’t.

I recommend utilizing “Cutaway” on stretchy cloth e.g. stretchy or knitted; utilizing “Tearaway” on stable materials e.g. woven; and ultizing “Washaway” on freestanding lace or garments, or a few great 3d stuff with organza – this is, if you need to get rid of the stabilizer entirely once the embroidery has been accomplished. Always employ a soluble topper on toweling. Once again, like anything else, test a few out and discover the probabilities through your own efforts.

May 25 2010 06:42 pm | Uncategorized

Leave a Reply

You Might Also Like

Comments are closed.